| The HT200 DMF projector has been designed completely by SIM2 specifically for home cinema and entertainment applications. Based on Digital Micromirror DeviceTM by Texas Instruments, the HT200 DMF projector matches the 480P High Definition standard, providing two different resolutions modes (by Remote control): |
a) 16:9 format with a resolution of 848 x 480 pixels: the ideal solution for progressive DVD players or other 16:9 sources; | b) the normal 4:3 format with a resolution of 800 x 600 pixels: best with computer images or traditional 4:3 video sources (Videotape recorders, etc). | | The HT200 DMF features a new built-in deinterlacer and video enhancement (DCDi™) powered by Faroudja (a division of Sage, Inc.) that completes the extraordinary performance of the projector. This new technology applies motion adaptive deinterlacing that prevents the introduction of motion artifacts and jagged edges from video signals that originate from video cameras. The DCDi™ also features patented 3/2 pull-down with advanced edit detection for exact reconstruction of the original film frame. | LIGHT ENGINE | | | DLP™ type: Proprietary sealed optical engine based on 1-chip DMD™. Contamination proof. | | Resolution: Dual mode 800x600 pixels and 848x480 pixels | | Lens: High quality, high resolution optics with both motorised zoom and focus adjustments | | Lamp power consumption & life time: 120W, 6000 hours | INSTALLATION | | Optical keystone adjustment: +/-10° | | Digital keystone adjustment: +/-13° vertical, +/-10° horizontal | | Picture size: 50-250 inches diagonal | | Aspect ratio: normal, anamorphic, letterbox, panoramic, pixel to pixel plus 3 custom-user adjustments | ELECTRONICS | | Horizontal & vertical scan freq.: 15-80 KHz / 48-100 Hz (max horizontal freq. corresponding to UXGA, 60 Hz) | | Video standards and graphic resolution: PAL B,G,H,I,M,N,60, SECAM, NTSC 3.58 & 4.43 automatically selected; HDTV ATSC (480p, 720p, 1080i); VGA, SVGA, XGA, UXGA (1600x1200 pixels) | | Deinterlacer and video enhancer: DCDi by Faroudja | | Contrast ratio (Full On / Full Off): >600:1 | | Colour Temperature: 3 preset colour temperatures plus a RC user adjustment acting directly on each colour (red, green and blue) | | Special video adjustment: Luma-Choma delay, adjustment by OSD | INPUTS/OUTPUTS | | 1 Composite video via RCA connectors | | 1 S-VHS via mini Din 4 pin | | 1 RGBHV via Dsub 15 (PC input) | | 1 x RGBS/YCrCbS via 4xRCA connectors | | 1 Remote Input Interface, EVC type, Standard VESA | | 1 x RS232 on Dsub 9 pins connector | | 1 x jack 12V power output, active when the projector is ON | | 1 x jack 12V power output, active when 16:9 format is selected (max 12V power output 100 mA ) | GENERAL SPECIFICATIONS | | Control: control software upgradable via RS232 serial interface | | Power consumption: 170W max | | Mains Voltage range and frequency: 120÷240 Vac +/- 10%, 48/62 Hz | | Weight: 11 lbs (5.0 Kg) | | Cabinet dimensions (WxHxD): 13.8" x 6.6" x 12.5" (350x167x318 mm) | CERTIFICATIONS | | Safety - in compliance with EN 60950/UL1950 | | Vibration - in compliance with IEC 68-2-6 | | Emission - in compliance with EN 55022 class B/150 KHz - 30MHz | | Recyclable packaging. | ACCESSORIES | | AC power cords (EC, UK, and USA) length 3m. | | User standard remote control with batteries | | Installation and user manual |
|
|
